Rotary joint installation should pay attention to what matters

Rotary joint installation should pay attention to what matters?
1, the rotary joint in the handling and storage process should avoid bumps and drops, to avoid damage to the interface and internal parts.
2, concentric installed as to ensure the smooth functioning of the rotary joint.
3, swivel threaded connections during  Hydraulic ferrules installation, you should pay attention to the inner and outer tube is threaded to correspond to the direction of rotation of the drum, and the inner and outer tubes screwed to it should be consistent.
4, the rotary joint and pipeline connection between the hose must be connected (we recommend the use of scrambling and good company metal hose), the absolute prohibition of rigid connection.
5, the rotary joint as directly as possible with the entrance hose. To relieve joint auxiliary weight and prolong life.
6, the inner tube assembly, with attention to the size and weight of the auxiliary support. Internal rotation of the rotary joint with the inner tube and fitting tolerances recommended H8/e7 fit.
7, the rotary joint rotation stopper should be properly supported and generally lever detent hole diameter should be smaller than 2mm, so as not to affect the freedom of swivel adjustment and compensation.
Connected to the device for rotating the joints of the various connections (customer specific configuration of the device according to set various types of connections)